Now that the tv-bench is assembled, let there be light ! Let’s put leds in there.
The best way we’ve found so far, is to use a wire net, adapt it to your space, add some rigidity with pvc tubes for example, and attach the leds.


step1.mp4.gif

#1-1

Start by taking a reference with a pvc tube.

Keep in mind that you’ll need few additionnal centimeters on each sides.
So don’t cut it too tight.

step2.mp4.gif
step3.mp4.gif
step4.mp4.gif

Good.

step5.mp4.gif

#2-1

Now we’re doing the same with the wire net.

step6.mp4.gif

#2-2

Take a reference, not too tight.

step6-web.jpg
step7.gif
step8.mp4.gif

#2-3

Put it all the way in.

step9.mp4.gif

#2-4

Cut the part the does not fit in.

step10.mp4.gif

#3-1

Ok now we have our structure, everything fits together, we’ll attach our leds now.

step11-web.jpg
step12.mp4.gif

#3-2

Unpack your SuperGreenKit.

step13.mp4.gif
step14-web.jpg
step15.mp4.gif

#3-3

Put the structure on the table, and put the leds in place.

step16-web.jpg

#3-4

It’s usually best to have them a little on the outside in such small places.

Now head on the the next step.