Now that we have all parts cut for our tv bench, we’re going to put it in place.
First thing is attaching all parts together, then preparing the tv bench to receive the newly created leds.


step30.gif

#1-1

Zip tie the leds, and the pvc tube to the wire net.

step31.mp4.gif
step32.mp4.gif

#1-2

Let’s have a little test.

step33-web.jpg
step34.mp4.gif

#2-1

We’ve found that the easiest way to put the leds in there without doing holes, and still allow to remove them afterward, is to put use isolation foam (or any other material that is easy to cut) and a knife.

step35.mp4.gif

#2-2

Again, let’s put it in place to take few references.
So you want to put it all the way in there and make marks like on the video.

step36.mp4.gif

#2-3

Finish cutting through the foam on a table.

step37-web.jpg

#2-4

You should end up with two pieces like this.

step38.mp4.gif

#2-5

Cleanup the work space, we’re stoners, not animals.

step39.mp4.gif

#3-1

Now take the hot glue gun.

step40.mp4.gif

#3-2

You might have a problem with the doors hinges.

Fix it like on the video here.

step41.mp4.gif

#3-3

Now we’re gonna glue them in place.

step42.mp4.gif
step43-web.jpg

You should end up with something like this.

step44.mp4.gif

And the led wire net should fit in, and the door should be able to close.