Back in stock 😛 !

 
The ultimate grow kit for transforming any furniture into a connected growbox!
 
Arrange the panels as needed for the best possible light coverage 🌞
The 6 panels enable you to to cover 2.5x2.5ft || 80x80cm for bigger plants 🌵
 
And with a blower&sensor combo you've got everything you need to setup a 2nd chamber for a simple perpetual harvest 👌

Back in stock 😛 !

 
The Nano Bundle aka. My First Growbox bundle is perfect to get started with 1-2 plants in a small space on a budget.
 
Join the best hobby ever and start growing your own :)
 
You can always upgrade later if you need/want, once you've got that first grow under your belt 👌
 
The 3 panels can cover 2.5x1.25ft || 80x40cm 💡

A lot of you have been asking for it, so we made it:)
No controller or app needed, just plug in, set the brightness, and you're good!

The power supply is NOT included in this bundle, but any 24v and at least 65w of power will do. Make sure to check the guide.

• Comes with 3x18w SGL panels
• Can also be used with the controller
• Produces little heat
• Perfect for tight spaces
• Add your own classic wall timer

We made a little portable screen for the SGL controller!
 
This small portable screen will connect to your SuperGreenController and the SuperGreenApp do display important datas.
 
With its small screen and button it will report to you the latest metrics of your environment and allow you to trigger sunglasses mode without pulling the app out.
 
The screen also integrates with your SGL account by reporting your currently active checklist item.

Add an extra blower and sensor to your setup.
This little kit will allow you to add a second controlled space to your setup.
 
Whether you want to make a veg box, or a drying box with temperature/humidity monitoring, you will need this little kit.
 
The blower can be controlled based on the sensor's values, set it to "humidity controlled" when doing a drying box to make sure you don't over or under ventilate you drying weed!

Does not require a SuperGreenLab Bundle or Controller to work 👌
 
Monitor your growbox environment and receive tips and lessons from the SuperGreenApp.
 
Even if you don't have a SuperGreenLab bundle and its controller, you can now still connect your GrowBox to the SuperGreenApp.
 
It comes with a temperature, humidity, VPD and CO2 sensor that will monitor your box environment. You can configure alerts based on those collected metrics.
 
The app will also monitor your grow diaries to tell you what to do to get the best harvest possible.
 
Checkout the SuperGreenApp features

A lot of you have been asking for it, so we made it:)
No controller or app needed, just plug in, set the brightness, and you're good!

Light extender Bundle
The extender Bundle is a full bundle set to add and control 3 extra nano led panels to your existing SuperGreenLab build.
The extender bundle consists out of

• 1 x Light Extender
• 3 x Nano led panel
• 4 x Nano led panel cables (3 for the LED panels, 1 that is connected between your controller and the light extender)
• 1 x Power supply to power your Light Extender
  Want to add more nano led panels? Take a look at the Light extender Bundle - BIG

Light extender Bundle
The extender Bundle is a full bundle set to add and control 5 extra nano led panels to your existing SuperGreenLab build.
The extender bundle consists out of

• 1 x Light Extender
• 5 x Nano led panel
• 6 x Nano led panel cables (5 for the LED panels, 1 that is connected between your controller and the light extender)
• 1 x Power supply to power your Light Extender
  Want to add 3 nano led panels? Take a look at the Light extender Bundle - Small

Want to control more panels with your controller?
Good news, we made the extender!
 
With the extender you will be able to plug up to 6 panels on a single led channel.
 
Alright now you can start that box extension you dreamed of :)
 
Not only will it allow you to put more sgl panels on your controller, it will allow to free up channels for other spectrums, because yes, the controller has special schedules for UVa, Deep Red, Far Red, and Deep Blue :D

Want to control bigger panels or plug the controller to your existing setup?
 
Here's the Meanwell adapter! Basically converts the signal from the controller to a meanwell driver compatible signal.
 
That's the perfect way to give your existing setup a fresh connected new life, with remote control, remote monitoring and alerts!
 
Make sure your meanwell driver is compatible first, it needs to have dimming wires, and be able to go to 0% through dimming control. Ask us on the chat is you're not sure.

Whether you got a nano bundle or an extender, you'll probably have free channels on your controller.
 
Even one panel is enough to make an early veg box extension to your existing setup, which can drastically diminish the time between harvests and keep the number of blooming plants low.

Get a precise idea of your environment in real time.
 
This sensor is what allows a SGL grower to keep his grow under control, and detect when something goes wrong.
 
Configure your alerts in the app and make sure you don't get out of track.

Growing in tight space has a big advantage, the box's volume makes it easy to renew the air inside, and guarantee that our beloved plant only has the freshest environment.
 
Btw, do you know that the SGL panels produce so little heat that it's actually possible to not have any ventilation with the outside?
 
Anyway, this blower will be able to renew the air even in large setups, like closets or medium sized grow tents.
And it's strong enough to pull through a carbon filter.
 
In small setups, don't put more than 20% power, or your furniture will take off.

The large panels are back!

Equivalent to 6 small panels (in terms of watts), with a minimal thickness footprint, they're a great alternative when small panels are not enough!

The idea is the same, cover as much surface as possible, with as little heat as possible, and adaptable to any space.

By far the simplest way to attach your led panels to your box.
 
These 3d printed led holders allow you to attach your panels to any flat surface.
 
Either flat or with a 35 degree angle, with minimal space footprint, you can surround your plant with light, and ensure a perfect exposition even in the tightest space.

The perfect carbon filter for stealth setups with one or two blooming plants.
 
This flat carbon filter was designed with stealth and small space in mind. The flat design allows to have it behind your box without taking too much space.
 
Just add some fresh carbon pellets, plug the carbon filter to your SGL blower, and you're good to go.

Among all types of sensors, by far the most reliable and educative is the timelapse camera.
 
Detect issues before they arrive, setup a camera in your box (checkout our guide!), and receive your daily and weekly timelapses, and just watch your plant telling you how she feels.
 
This camera holder allows to easily setup a raspberry pi zero and a raspberry pi camera (with or without night vision). It can be glued either to a flat surface or a corner.

It comes with 6 rail pieces (each 20cm | 7.8in) and 4 LED holders;
perfect for small vertical builds like the famous "Eket" 👌.
The rails can be easily installed with VHB (Very High Bond) double sided tape, or just hot glued.

Each of the 4 LED holder slides on the rails for height adjustment to follow the plant as it grows.
And you can also adjust the LED holder's angle for optimal light coverage 💡

NEW HOLDER!

Perfect led holders for tent setups.
Those holders can be clipped to any 16mm tent poles.
Could be either used with large tents as ambient light supplement, or in tiny tents.
🛠 Comes with 6 holders, easy to assemble and setup in your tent.
💡There angle and height can be adjusted for the best coverage of your plant.

SuperGreenLab's construction set.
 
If you own a 3d printer these are all the parts used to create the 3d printed kits in the shop.
 
All parts can be printed on any common 3d printers, PLA and PETG are used, but other materials could do.
 
Free to download and open source👌

Best way to train your plant is to tie its brances with garden wires, problem is you need something to attach it to. So the usual solution is to make holes in your pots.
Which is not ideal, for example it's common to want to move the hole after a bit of growing.
So here's the first pot attach tool from SGL, just screw it on the side of your pot, no holes to make.

• Easy to assemble, no more power tools, just a screw driver
• Can be downloaded for free
• The source plans are available, which means you can edit them to your own needs!
• Lot of space to grow a full size plant
• Minimal energy footprint (avg 40w throughout the grow)
• from 30 to 70g harvest depending how much the plant fills the space

• Contains all the hardware required to build a SuperGreenBox
• All you're left is to get the wooden parts laser cut locally

Everything you need to start growing in a 35x35x70cm || 14x14x28in space.
 
This build uses 3 or 4 panels, either but putting 2 panels on each sides, or 3 panels at the back of the furniture.
 
Small & stealthy, this is the OG SuperGreenLab build we introduced on YouTube.
 

It can grow one plant from seed to harvest and yields around 45g (with some amazing success stories with a grower from the community achieving over 80g!)
 

A great pick for beginner growers looking to grow their first plant.
 
Check out the build guide & video tutorial for building your own.

Cut down time between harvests with a 2 chamber perpetual harvest version of the above single chamber build.
 
Start growing a new plant in the smaller box before the one in the main box is ready for harvest.
 
Check out the build guide & video tutorial for building your own.

Looking for something bigger?
 
It’s possible! Spread out the lights and cover a bigger surface like a TV stand or closet.
 
Split the spaces for an awesome perpetual harvest setup capable of yielding over 80g per harvest.

With two separate chambers this build can do perpetual harvests in a very small package.
Cut down time between harvests by having 1 plant growing while the other flowers.
 
Follow the detailed step-by-step guide + YouTube video to build your own!
 
Also included: downloadable patterns to build parts out of cardboard 👌

So far, the best way to not fail a grow is to check on your plants daily.
Or even better, check the daily timelapse to make sure the plant is happy and not miss any sign of an upcoming issue.

In this guide we're going to show you The Golden Rule for harvesting at the perfect time and why being patient matters 👌
 

We’ll go into details of the 3 step to figure out when to harvest your plant.
 
+ follow along the YouTube video 👌

Everything you need for the final steps before you can enjoy the fruits of your labor!
 
Drying and curing of your buds, like aging wine but faster - this step will reveal your plant’s true aroma and power.